We sell, supply, service and carry spare parts for these products.
All equipment servicing to manufacturer’s specs by Eppendorf factory certified technicians.
Calibration, repair, service, spare parts, Compliance Covering - IQ/OQ/PQ, calibration and validations.
On-site repairs are available for customers in Sydney, Melbourne and Brisbane.
For other areas/States, we offer a workshop service or spare parts.
Eppendorf Vacuum Concentrator Plus ~ overview
The new Concentrator plus from Eppendorf is available in two configurations:
Complete system with an integrated service-free diaphragm pump
Basic concentrator for connecting to an existing vacuum.
The concentrator can easily be upgraded to a complete system at a later stage if desired. Power to external vacuum pumps can be automatically controlled by using the AC receptacle in the rear of the concentrator.
The Concentratorâ€™s heating technology optimizes the evaporation process. No matter which configuration you choose, youâ€™re assured of quick and efficientâ€”yet gentleâ€”vacuum concentration of your samples (e.g. DNA/RNA, proteins).
The complete system includes a vapour condenser that purifies the exhaust air by up to 85%. This serves as protection against unpleasant vapours. At the same time, an automatic condensate drain extends the service life of all components that come into contact with the vapours.
The new Concentrator plus features a new LCD display and user-friendly control panel with clearly labeled function keys.
Eppendorf Vacuum Concentrator Plus ~ features
Narrow 32 cm width saves valuable bench space
Chemical-resistant PTFE diaphragm pump
Chemical-resistant stainless steel chamber
Extremely quiet operation, even with pump turned on
Choice of three application modes (aqueous, alcohol or high vapour pressure) to correspond with sample solvent reduction of processing time up to 20%
Choice of four heating levels (room temperature, 30 Â°C, 45Â° C, 60 Â°C) allows safe and efficient concentration of various samples
Centrifugation and Desiccator function
Concentrator junction system
The Concentrator plus complete system adds extra flexibility with a junction for external devices. It allows you to use the integrated vacuum pump separately â€“ without having to disconnect it from the system; simply connect the port to any external device that requires vacuum (e.g. gel dryer).
A wide range of fixed-angle rotors and the microplate rotor A-2-VC enable the Concentrator plus to be used for various applications in the laboratory.
Eppendorf Vacuum Concentrator Plus ~ technical
Max. power consumption
Dimensions (W x D x H)
32 x 53 x 30 cm
32 x 37 x 23 cm
20 hPa (20 mbar)
20 hPa (20 mbar)
Fixed rotation speed
max. 144 tubes
max. 144 tubes
Eppendorf Vacuum Concentrator Plus ~ ordering
We have endeavoured to provide Australian catalogue numbers; however it would be prudent to verify any catalogue numbers taken straight from our site with POCD Scientific before using them to place an order.
Concentrator plus complete system
with built-in diaphragm pump and 48 x 1.5/2.0 ml fixed-angle rotor
with built-in diaphragm pump, with junction for external devices (e.g. gel-dryer), without rotor
with built-in diaphragm pump, without rotor
Concentrator plus basic device
with 48 x 1.5/2.0 ml fixed-angle rotor
Upgrade option for converting basic concentrator to a complete system
(needs to be installed by Eppendorf service personnel),
incl. diaphragm pump with inner PTFE coating, vapour condenser
and two rails for connecting concentrator and pump
Rotor spacer, required for stacking rotors F-45-72-8 and F-45-48-11
Adapter for CombiSlide® (set of 2)
for 0.5 ml or 0.6 ml MicrotainerÂ® tubes, set of 6, for rotor F-45-48-11
for 0.2 ml PCR tubes, set of 6, for rotor F-45-48-11
Work traysfor 96 x 0.2 ml PCR tubes (set of 10) and plates without frame
Frame for work tray (set of 5)
Eppendorf Vacuum Concentrator Plus ~ accessories
Swing-bucket rotor A-2-VC for Concentrator plus / 5301
For use with MTPs, PCR plates and up to 2 x 96 0.2 ml PCR tubes and tube strips
Load MTPs and PCR plates directly
To spin down individual PCR tubes or tube strips, PCR plates and MTPs without frame, use the Work tray and Frame
Rotor is autoclavable at 121 Â°C, 20 min
Two MTPs can be accommodated for low-speed centrifugation
Holds CombiSlideÂ® adapter
Max. tube capacity
(Ã˜ Ã— L or L Ã— W Ã— H)
Two buckets for:
â€¢ 0.2 ml PCR tubes
â€¢ 5-tube or 8-tube strips
â€¢ PCR plates
â€¢ Cell culture plates
â€¢ Deepwell plates
(max. height = 27 mm)
128 Ã— 86 Ã— 27
(with CombiSlideÂ® adapter)
26 Ã— 75
Fixed-angle rotors for different tube types (Concentrator plus / 5301
A large number of fixed-angle rotors for use of various tube sizes and dimensions are available for the Concentrator plus. A spacer enables stacking of some fixed-angle rotors, increasing the capacity to 96 or 144 samples.
Tube capacity in ml
Tube dimensions in mm (Ã˜ x L)
Tube capacity per rotor
Order no. for rotor
8 x 31
11 x 41
11 x 47
11 x 41
11 x 47
12 x 67–100*
16 x 97
18 x 105–128*
17 x 120
12 x 32
15 x 48
20 x 42
20 x 55
19 x 66
31 x 55
24 x 86
Eppendorf Vacuum Concentrator Plus ~ downloads
These Eppendorf manuals discussing aspects of the Concentrator Plus usage are downloadable here:
Using the Concentrator plus in a sequencing laboratory
Connecting an external vacuum pump to the Concentrator plus