3 sizes with 100, 400, and 800 l filling capacity (1 mm, 2 mm, and 4 mm gap width)
Individually wrapped and gamma-radiation sterilised
Correct positioning in the cuvette holder guaranteed due to design
Clear gap width identification by lateral cuvette label
Frosted labeling area for clear experiments
Eppendorf Electroporation cuvettes ~ features
Eppendorf Electroporation cuvettes ~ ordering
We have endeavoured to provide Australian catalogue numbers; however it would be prudent to verify any catalogue numbers taken straight from our site with POCD Scientific before using them to place an order.
Electroporation cuvettes, gap width 1 mm, 100 µl, sterile, 50 pcs.
Electroporation cuvettes, gap width 2 mm, 400 µl, sterile, 50 pcs.
Electroporation cuvettes, gap width 4 mm, 800 µl, sterile, 50 pcs.
Cuvette stand for 16 electroporation cuvettes
Eppendorf Electroporation cuvettes ~ accessories
Eppendorf Electroporation cuvettes ~ consumables
Eppendorf Electroporation cuvettes ~ downloads
Electrofusion buffer of eukaryotic cells
Electroporation buffer for eukaryotic cells
These are PDF files, to obtain a free Adobe PDF reader:
What material is the cuvette stand made of and can it be autoclaved?
The cuvette stand for electroporation cuvettes is made of polypropylene and can be autoclaved at 121 Â°C.
Is it possible to use Eppendorf electroporation cuvettes in other manufacturers' devices?
Yes, it is possible.
Is it also possible to use less than the specified cuvette filling volume for electroporation?
Yes. The specified cuvette volume (e.g. 100 Âµl for a 1 mm cuvette) is the maximum volume and also the optimum volume for the electroporation. Smaller samples can also be used, as long as the electrodes are connected through liquid. It is only necessary to be sure that the field strength during a pulse in the cuvette is less than 10,000 V/cm. Above this value, electric sparkover can occur through the air.
What is the maximum sample volume I could use with the electroporation cuvettes?
The maximum sample volume depends on the cuvette size. The maximum samples sizes for the various size cuvettes are as follows:
1 mm gap: 100 Âµl
2 mm gap: 400 Âµl
4 mm gap: 800 Âµl